Batching Example - No Label Consolidation, Saw Files Consolidate Per Truss

Watch video

Summary

This example covers the steps necessary to configure your Presets to allow for No Label Consolidation, Saw Files Consolidate Per Truss. This is an example of the Assembly report with the applied settings.

Steps

No Label Consolidation, Saw Files Consolidate per Truss

1.  In the main Project List window, select Presets.

2.  Select Piece Labeling and Sequencing, and information displays to the right.

The Preset Manager > Fabrication > Piece Labeling and Sequencing window below displays the selections used to produce this example.

3.  For Process Unit > Cutting Output Consolidation By, select Truss so the saw file groups pieces by truss.

4.  For Piece Labeling and Sequencing, select the following:

  • For Piece Label Prefix, select TBWGO, so the boards start with T, B, W, G, and O.

5.  For the Piece Sequencing, select the following:

  • Select Restart Sequence At > Cutting Output Consolidation, to have the numbering match the Saw file consolidation set in Process Unit.
  • Select Restart per Piece Type, to have each piece type start with a number 1 .
  • Select Chord Labeling Sequence > Left to Right Position on Truss, so the piece on the left side starts with 1 and continues across the truss so highest number ends on the right side.
  • Select Web Labeling Sequence > Left to Right Position on Truss, so the piece on the left side starts with 1 and continues across the truss so highest number ends on the right side.

6.  Select Piece Label Consolidation > No Consolidation, so that no labels have consolidation.

7.  Click Close.

8.  After Presets are configured, select Tools > Batch Process and click Process.

9.  This is an example of a Truss Assembly report with No Label Consolidation, Saw Files Consolidate Per Truss.

 

Related Topics